Table is for reference only. See individual Series' datasheets for specific screening.

nOn

/eS

/883

Pre-cap Inspection, method 2017, 2032

n

n

n

Temperature Cycle (10 times)

Method 1010, Cond. C, -65°C to +150°C, ambient

n

Method 1010, Cond. B, -55°C to +125°C, ambient

n

Constant acceleration

Method 2001, 3000 g

n

Method 2001, 500 g

n

PIND, Test method 2020, Cond. a

96 hours

n

160 hours

n

Final Electrical Test, mIl-PRF-38534, group a,

Subgroups 1 through 6, -55°C, +25°C, +125°C case

n

Subgroups 1 and 4, +25°C case

n

n

Hermeticity Test

gross leak, Method 1014, Cond. C

n

n

Fine leak, Method 1014, Cond. a

n

n

gross leak, dip

n

Final visual inspection, method 2009

n

n

n

Test methods are referenced to Mil-STd-883 as determined by Mil-PrF-38534.

notes

1. Standard and /eS, non-QMl products, may not meet all of the requirements of MIl-pRF-38534.

2. All processes are QMl qualified and performed by certified operators.

3. not required by dla but performed to assure product quality.

4. Burn-in temperature designed to bring the case temperature to +125°C minimum. Burn-in is a powered test.

MHF+ Single, dual and Triple. MHF+ rev aB - 2014.10.02 This revision supersedes all previous releases. all technical information is believed to

be accurate, but no responsibility is assumed for errors or omissions. Crane electronics, inc. reserves the right to make changes in products or

specifications without notice. interpoint is a registered trademark of Crane Co. MHF+ Series is a trademark of Crane electronics, inc.

Copyright © 1999 - 2014 Crane electronics, inc. all rights reserved. www.craneae.com/interpoint.

Page 23 of 23

Crane Aerospace & Electronics Power Solutions

mHF+ Single, Dual and Triple DC-DC Converters

28 VOlT INPuT – 15 WaTT