TLE4961-5M datasheet(11/26 Pages) INFINEON

Il numero della parte	TLE4961-5M

Spiegazioni elettronici	High Precision Automotive Hall Effect Latch

PDF	26 Pages

Scroll/Zoom	100%

Produttore elettronici	INFINEON [Infineon Technologies AG]

Homepage	http://www.infineon.com

Logo

11 / 26 page

TLE4961-5M

Functional Description

Data Sheet

Revision 1.0, 2013-07-04

2.6

Default Start-up Behavior

The magnetic thresholds exhibit a hysteresis BHYS =BOP -BRP. In case of a power-on with a magnetic field B within

hysteresis (BOP >B >BRP) the output of the sensor is set to the pull up voltage level (VQ) per default. After the first

crossing of BOP or BRP of the magnetic field the internal decision logic is set to the corresponding magnetic input

value.

VDDA is the internal supply voltage which is following the external supply voltage VDD.

This means for B > BOP the output is switching, for B < BRP and BOP >B>BRP the output stays at VQ.

Figure 2-5

Illustration of the Start-up Behavior of the TLE4961-5M

B > BOP

B < BRP

BOP > B > BRP

Magnetic field above threshold

Magnetic field below threshold

Magnetic field in hysteresis

Power on ramp

The device always applies

VQ level at start -up

independent from the

applied magnetic field !

VDDA

tPon

TLE4961-5M Scheda tecnica(PDF) 11 Page - Infineon Technologies AG