| Motore di ricerca datesheet componenti elettronici |
|
WM8955LEFL Scheda tecnica(PDF) 22 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8955LEFL Scheda tecnica(HTML) 22 Page - Wolfson Microelectronics plc |
|
22 / 43 page ![]() WM8955L Product Preview w Product Preview Rev 0.4 May2003 22 ANALOGUE OUTPUTS ENABLING THE OUTPUTS Each analogue output of the WM8955L can be separatelyenabled or disabled. The analogue mixer associated with each output is powered on or off along with the output pin. All outputs are disabled by default. To save power, unused outputs should remain disabled. Outputs can be enabled at anytime, except when the WM8955L is in OFF mode, as this maycause pop noise (see Minimising Pop Noise at the Analogue Outputs) REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION 8 LOUT1 0 LOUT1 Enable 7 ROUT1 0 ROUT1 Enable 5 LOUT2 0 LOUT2 Enable 4 ROUT2 0 ROUT2 Enable 2 MONO 0 MONOOUT Enable R26 (1Ah) Power Management (2) 1 OUT3 0 OUT3 Enable Note: All “Enable” bits are 1 = ON, 0 = OFF Table 10 Analogue Output Control HEADPHONE SWITCH The HPDETECT pin can be used as a headphone switch control input to automaticallydisable the speaker output and enable the headphone output e.g. when a headphone is plugged into a jack socket. In this mode, enabled bysetting HPSWEN, HPDETECT switches between headphone and speaker outputs (typically, the pin is connected to a mechanical switch in the headphone socket to detect plug-in). The HPSWPOL bit reverses the pin’s polarity. HPDETECT has CMOS thresholds at 0.3 AVDD / 0.7 AVDD. Note that the LOUT1, ROUT1, LOUT2 and ROUT2 bits in register 26 must also be set to enable headphone and speaker outputs (see tables below). REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION 6 HPSWEN 0 Headphone Switch Enable 0 : Headphone switch disabled 1 : Headphone switch enabled R24 (18h) Additional (1) 5 HPSWPOL 0 Headphone Switch Polarity 0 : HPDETECT high = headphone 1 : HPDETECT high = speaker Table 11 Headphone Switch HPSWEN HPSWPOL HPDETECT (PIN23) L/ROUT1 (reg. 26) L/ROUT2 (reg. 26) Headphone enabled Speaker enabled 0X X 0 0 no no 0X X 0 1 no yes 0 X X 1 0 yes no 0 X X 1 1 yes yes 10 0 X 0 no no 10 0 X 1 no yes 10 1 0 X no no 1 0 1 1 X yes no 11 0 X 0 no no 1 1 0 X 1 yes no 11 1 0 X no no 11 1 1 X no yes Table 12 Headphone Switch Operation |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |