RM024 – RAMP Wireless Module

Datasheet

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/ramp

21

© Copyright 2015 Laird. All Rights Reserved

Americas: +1-800-492-2320

Europe: +44-1628-858-940

Hong Kong: +852 2923 0610

6.2 CE Requirements for Modular Approval

6.2.1 RM024 Part Numbers Approved for CE

Part Number *

Form Factor

Tx Output

Antenna

RM024-S10-C-XX

Surface Mount

10 mW

U.FL

RM024-S10-M-XX

Surface Mount

10 mW

U.FL or Chip

RM024-P10-C-XX

Pluggable

10 mW

U.FL

RM024-P10-M-XX

Pluggable

10 mW

U.FL or Chip

Currently, these values are -30, for FW version 3.0.

The part numbers listed above are approved for use in CE markets with antennas having a maximum gain of

2.0 dBi. Antennas having a gain greater than the maximum allowed are strictly prohibited for use with this

device. The required antenna impedance is 50 ohms.

6.2.2 CE Tested Antenna List

Manufacturer

Manufacturer Part Number

Laird Part Number

Type

Gain (dBi)

Laird

WIC2452-A

MAF95029

Chip

2

Laird

NZH2400-MMCX

2150-00006

Microstrip

1

Nearson

S181FL-6-PX-2450S

Dipole

2

Laird

WCP2400

WCP2400

Dipole

2

Note: The OEM is free to choose another vendor’s antenna of like type and equal or lesser gain as an

antenna appearing in the table and still maintain compliance. Antennas listed in this table have been

test with the RM024.

Additional RM024 technical documents and software downloads are available from the Laird RM024 product

page under the Documentation tab and Software Downloads tabs.