L6985F datasheet(49/65 Pages) STMICROELECTRONICS

Il numero della parte	L6985F

Spiegazioni elettronici	Internal current limiting

PDF	65 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

49 / 65 page

DocID027836 Rev 2

49/65

L6985F

Application notes

Figure 39. Slave to master mode transition

The external master can force a latched SLAVE mode driving the SYNCH pin low at power-

up, before the soft-start starts the switching activity. So the oscillator frequency is 250 kHz

typ. fixed until a new UVLO event is triggered regardless FSW resistor value, that otherwise

counts to design the slope compensation. The same considerations above are also valid.

The master driving capability must be able to provide the proper signal levels at the SYNCH

pin (see Table 5 on page 8 - Synchronization section):

 Low level < VSYN THL= 0.7 V sinking 5 mA

 High level > VSYN THH = 1.2 V sourcing 0.7 mA

Figure 40. Master driving capability to synchronize the L6985F

250kHz typ.

SLAVE mode

standalone operation at nominal fsw

SYNCH signal

switching node

L6985F Scheda tecnica(PDF) 49 Page - STMicroelectronics