AD7654ASTZ datasheet(11/28 Pages) AD

Il numero della parte	AD7654ASTZ

Spiegazioni elettronici	16-Bit, 500 kSPS PulSAR Dual, 2-Channel, Simultaneous Sampling ADC

PDF	28 Pages

Scroll/Zoom	100%

Produttore elettronici	AD [Analog Devices]

Homepage	http://www.analog.com

Logo

11 / 28 page

AD7654

Data Sheet

Rev. D | Page 10 of 27

Pin No.

Mnemonic

Type1

Description

CNVST

Start Conversion. A falling edge on CNVST puts the internal sample-and-hold into the hold state and

initiates a conversion. In impulse mode (IMPULSE = high), if CNVST is held low when the acquisition

phase (t8) is complete, the internal sample-and-hold is put into the hold state and a conversion is

immediately started.

REF

This input pin is used to provide a reference to the converter.

REFGND

Reference Input Analog Ground.

39, 41

INB1, INB2

Channel B Analog Inputs.

40, 45

INBN, INAN

Analog Inputs Ground Senses. Allow to sense each channel ground independently.

42, 43

REFB, REFA

These inputs are the references applied to Channel A and Channel B, respectively.

44, 46

INA2, INA1

Channel A Analog Inputs.

EPAD

Exposed Pad. The EPAD is connected to ground; however, this connection is not required to meet

specified performance.

1 AI means analog input; DI means digital input; DI/O means bidirectional digital; DO means digital output; P means power.

AD7654ASTZ Scheda tecnica(PDF) 11 Page - Analog Devices