AD7654ASTZ datasheet(21/28 Pages) AD

21 / 28 page

AD7654

Data Sheet

Rev. D | Page 20 of 27

SERIAL INTERFACE

The AD7654 is configured to use the serial interface when the

SER/PAR is held high. The AD7654 outputs 32 bits of data,

MSB first, on the SDOUT pin. The order of the channels being

output is also controlled by A/B. When high, Channel A is

output first; when low, Channel B is output first. This data is

synchronized with the 32 clock pulses provided on the SCLK pin.

MASTER SERIAL INTERFACE

Internal Clock

The AD7654 is configured to generate and provide the serial

data clock SCLK when the EXT/INT pin is held low. The

AD7654 also generates a SYNC signal to indicate to the host

when the serial data is valid. The serial clock SCLK and the

SYNC signal can be inverted if desired. The output data is valid

on both the rising and falling edge of the data clock. Depending

on RDC/SDIN input, the data can be read after each conversion

or during the following conversion. Figure 30 and Figure 31

show the detailed timing diagrams of these two modes.

Usually, because the AD7654 is used with a fast throughput, the

master-read-during-convert mode is the most recommended

serial mode when it can be used. In this mode, the serial clock

and data toggle at appropriate instants, which minimizes

potential feedthrough between digital activity and the critical

conversion decisions. The SYNC signal goes low after the LSB

of each channel has been output. Note that in this mode, the

SCLK period changes because the LSBs require more time to

settle, and the SCLK is derived from the SAR conversion clock.

Note that in the master-read-after-convert mode, unlike in

other modes, the signal BUSY returns low after the 32 data bits

are pulsed out and not at the end of the conversion phase,

which results in a longer BUSY width. One advantage of using

this mode is that it can accommodate slow digital hosts because

the serial clock can be slowed down by using DIVSCLK[1:0]

inputs. Refer to Table 4 for the timing details.

AD7654ASTZ Scheda tecnica(PDF) 21 Page - Analog Devices