MB90335 datasheet(3/84 Pages) FUJI

3 / 84 page

MB90335 Series

s INTERNAL PERIPHERAL FUNCTION (RESOURCE)

•••• I/O port: Max 45 ports

•••• Time-base timer : 1channel

•••• Watchdog timer : 1 channel

•••• 16-bit reload timer : 1 channel

•••• Multi-functional timer

• 8/16-bit PPG timer (8-bit

× 4 channels or 16-bit × 2 channels) the period and duty of the output pulse can be

set by the program.

• 16-bit PWC timer : 1 channel

Timer function and pulse width measurement function

•••• UART : 2 channels

• Equipped with Full duplex double buffer with 8-bit lenghth

• Asynchronous transfer or clock-synchronous serial (I/O extended serial) transfer can be set.

•••• Extended I/O serial interface: 1 channel

•••• DTP/External interrupt circuit (8 channels)

• Activate the extended intelligent I/O service by external interrupt input

• Interrupt output by external interrupt input

•••• Delayed interrupt output module

• Output an interrupt request for task switching

•••• USB : 1 channel

• USB function (conform to USB 2.0 Full Speed)

• Supports for Full Speed/Endpoint are specifiable up to six.

• Dual port RAM (The FIFO mode is supported).

• Transfer type: Control, Interrupt, Bulk or Isochronous transfer possible

• USB Mini Host function

•••• I2C Interface : 1 channel

• Supports Intel SM bus standards and Phillips I2C bus standards

• Two-wire data transfer protocol specification

• Master and slave transmission/reception

Note : I2C licenae :

Purchase of Fujitsu I2C components conveys a license under the Philips I2C Patent Rights to use,

these components in an I2C system provided that the system conforms to the I2C Standard Specification as

defined by Phillips.

Preliminary

2004.01.09

MB90335 Scheda tecnica(PDF) 3 Page - Fuji Electric