ISO6721 datasheet(8/38 Pages) TI1

8 / 38 page

6.7 Safety-Related Certifications

VDE

CSA

CQC

TUV

Plan to certify according to

DIN VDE V 0884-11:2017-

Plan to certify according to

IEC 60950-1 and IEC

62368-1

Plan to certify according to

UL 1577 Component

Recognition Program

Plan to certify according to

GB4943.1-2011

Plan to certify according to

EN 61010-1:2010/

A1:2019, EN

60950-1:2006/A2:2013

and EN 62368-1:2014

Maximum transient

isolation voltage, 4242

VPK;

Maximum repetitive peak

isolation voltage, 637 VPK;

Maximum surge isolation

voltage,

5000 VPK

400 VRMS basic insulation

per CSA

60950-1-07+A1+A2, IEC

60950-1 2nd Ed.+A1+A2,

CSA 62368-1- 14 and IEC

62368-1:2014, (pollution

degree 2, material group

Single protection,

3000 VRMS

Basic insulation, Altitude ≤

5000 m, Tropical Climate,

250 VRMS maximum

working voltage

3000 VRMS (D-8)

Reinforced insulation per

EN 61010-1:2010/A1:2019

up to working voltage of

300 VRMS (D-8)

3000 VRMS (D-8)

Reinforced insulation per

EN 60950-1:2006/A2:2013

and EN 62368-1:2014 up

to working voltage of 400

VRMS (D-8)

Certificate planned

6.8 Safety Limiting Values

Safety limiting(1) intends to minimize potential damage to the isolation barrier upon failure of input or output

circuitry.

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

D-8 PACKAGE

Safety input, output, or supply current (1)

RθJA =104.6°C/W, VI = 5.5 V, TJ = 150°C,

TA = 25°C

217.2

RθJA = 104.6°C/W, VI = 3.6 V, TJ = 150°C,

TA = 25°C

332

RθJA = 104.6°C/W, VI = 2.75 V, TJ =

150°C, TA = 25°C

434.5

RθJA = 104.6°C/W, VI = 1.89 V, TJ =

150°C, TA = 25°C

628.9

Safety input, output, or total power (1)

RθJA = 104.6°C/W, TJ = 150°C, TA = 25°C

1195

Maximum safety temperature (1)

150

°C

(1)

The maximum safety temperature, TS, has the same value as the maximum junction temperature, TJ, specified for the device. The IS

and PS parameters represent the safety current and safety power respectively. The maximum limits of IS and PS should not be

exceeded. These limits vary with the ambient temperature, TA.

The junction-to-air thermal resistance, RθJA, in the table is that of a device installed on a high-K test board for leaded surface-mount

packages. Use these equations to calculate the value for each parameter:

TJ = TA + RθJA × P, where P is the power dissipated in the device.

TJ(max) = TS = TA + RθJA × PS, where TJ(max) is the maximum allowed junction temperature.

PS = IS × VI, where VI is the maximum input voltage.

ISO6721

SLLSFJ0 – JULY 2020

www.ti.com

Submit Document Feedback

Product Folder Links: ISO6721

ISO6721 Scheda tecnica(PDF) 8 Page - Texas Instruments

ISO6721 Scheda tecnica(HTML) 8 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Scheda tecnica Scarica

Link URL