PIMXRT406LCJM4A datasheet(37/71 Pages) NXP

37 / 71 page

Electrical characteristics

i.MX RT1015 Crossover Processors Data Sheet for Consumer Products, Rev. 2, 03/2021

NXP Semiconductors

Figure 15. FlexSPI input timing in SDR mode where FlexSPIn_MCR0[RXCLKSRC] = 0X0, 0X1

NOTE

Timing shown is based on the memory generating read data on the SCK

falling edge, and FlexSPI controller sampling read data on the falling edge.

4.5.1.0.2

SDR mode with FlexSPIn_MCR0[RXCLKSRC] = 0x3

There are two cases when the memory provides both read data and the read strobe in SDR mode:

•

A1–Memory generates both read data and read strobe on SCK rising edge (or falling

edge)

•

A2–Memory generates read data on SCK falling edge and generates read strobe on

SCK rising edgeSCK rising edge

Figure 16. FlexSPI input timing in SDR mode where FlexSPIn_MCR0[RXCLKSRC] = 0X3 (Case A1)

Table 31. FlexSPI input timing in SDR mode where FlexSPIn_MCR0[RXCLKSRC] = 0x3 (Case A1)

Symbol

Parameter

Value

Unit

Min

Max

—

Frequency of operation

—

166

MHz

TSCKD

Time from SCK to data valid

—

TSCKDQS

Time from SCK to DQS

—

TSCKD - TSCKDQS

Time delta between TSCKD and TSCKDQS

-2

TIS

TIH

SCK

SIO[0:7]

TIS

TIH

Internal Sample Clock

TSCKDQS

SCK

SIO[0:7]

DQS

TSCKD

TSCKDQS

TSCKD

PIMXRT406LCJM4A Scheda tecnica(PDF) 37 Page - NXP Semiconductors

PIMXRT406LCJM4A Scheda tecnica(HTML) 37 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

Scheda tecnica Scarica

Link URL