| Motore di ricerca datesheet componenti elettronici |
|
ST25DV64KC Scheda tecnica(PDF) 115 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST25DV64KC Scheda tecnica(HTML) 115 Page - STMicroelectronics |
|
115 / 203 page ![]() 7.6.25 Extended Get Multiple Block Security Status When receiving the Extended Get Multiple Block Security Status command, the ST25DVxxKC sends back the security status for each address block: 0 when the block is writable else 1 when block is locked for writing. The block security statuses are defined by the area security status. The blocks are numbered from 00h up to the maximum memory block number in the request, and the value is minus one (–1) in the field. For example, a value of '06' in the “Number of blocks” field requests to return the security status of seven blocks. This command does not respond an error if number of blocks overlap areas or overlap the end of the user memory. The number of blocks is coded on 2 Bytes so all memory blocks of ST25DV16KC and ST25DV64KC can be addressed using this command. The Option_flag is not supported. The Inventory_flag must be set to 0. Table 180. Extended Get Multiple Block Security Status request format Request SOF Request_flags Extended Get Multiple Block Security Status UID(1) First block number Number of blocks CRC16 Request EOF - 8 bits 3Ch 64 bits 16 bits 16 bits 16 bits - 1. This field is optional. Request parameter: • Request flags • UID (optional) • First block number (from LSB byte to MSB byte) • Number of blocks (from LSB byte to MSB byte) Table 181. Extended Get Multiple Block Security Status response format when Error_flags NOT set Response SOF Response_flags Block security status CRC16 Response EOF - 8 bits 8 bits (1) 16 bits - 1. Repeated as needed. Response parameters: • Block security status Table 182. Block security status b7 b6 b5 b4 b3 b2 b1 b0 Reserved for future use All at 0 0: Current block not locked 1: Current block locked Table 183. Extended Get Multiple Block Security Status response format when Error_flag is set Response SOF Response_flags Error code CRC16 Response EOF - 8 bits 8 bits 16 bits - ST25DV04KC ST25DV16KC ST25DV64KC RF commands DS13519 - Rev 3 page 115/203 |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |