 |
Motore di ricerca datesheet componenti elettronici |
|
|
Motore di ricerca datesheet componenti elettronici |
|
ST25DV64KC Scheda tecnica(PDF) 122 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST25DV64KC Scheda tecnica(HTML) 122 Page - STMicroelectronics |
|
|
122 / 203 page  Request parameters: • Request flag • UID (optional) • Data: Define static or dynamic Interrupt Table 198. Manage GPO response format when Error_flag is NOT set Response SOF Response_flags CRC16 Response EOF - 8 bits 16 bits - Response parameter: • No parameter. The response is sent back after the write cycle. Table 199. ManageGPO response format when Error_flag is set Response SOF Response_flags Error code CRC16 Response EOF - 8 bits 8 bits 16 bits - Response parameter: • Error code as Error_flag is set: – 02h: command not recognized – 13h: the specified block was not successfully programmed (this error is generated if the ManageGPO GPOVAL value is not in line with the GPO interrupts setting as specified in Table 197. GPOVAL) Figure 65. Manage GPO frame exchange between VCD and ST25DVxxKC SOF ManageGPO request VCD EOF ST25DVxxKC t1 SOF ManageGPO response EOF 7.6.31 Write Message On receiving the Write Message command, the ST25DVxxKC puts the data contained in the request into the Mailbox buffer, update the MB_LEN_Dyn register, and set bit RF_PUT_MSG in MB_CTRL_Dyn register. It then reports if the write operation was successful in the response. The ST25DVxxKC Mailbox contains up to 256 data bytes which are filled from the first location '00'. MSGlength parameter of the command is the number of Data bytes minus - 1 (00 for 1 byte of data, FFh for 256 bytes of data). Write Message could be executed only when Mailbox is accessible by RF (fast transfer mode is enabled, previous RF message was read or time-out occurs, no I2C message to be read). User can check it by reading b1 of MB_CTRL_Dyn “HOST_PUT_MSG” which must be reset to “0”. The Option_flag is not supported. (refer to Section 5.1 Fast transfer mode (FTM)). Table 200. Write Message request format Request SOF Request_ flags Write Message IC Mfg code UID (1) MSGLength Message Data CRC16 Request EOF - 8 bits AAh 02h 64 bits 1 byte (MSGLength + 1) bytes 16 bits - 1. This field is optional. ST25DV04KC ST25DV16KC ST25DV64KC RF commands DS13519 - Rev 3 page 122/203 |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Italian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
