WM8214SCDSSLASHR datasheet(18/36 Pages) WOLFSON

18 / 36 page

WM8214

Production Data

PD Rev 4.1 March 2007

128

256

384

512

Gain Code (PGA[8:0])

0.5

1.5

2.5

3.5

128

256

384

512

Gain Code (PGA[8:0])

Max i/p V oltage

LOWREFS=0

Max i/p V oltage

LOWREFS=1

Figure 13 PGA Gain Characteristic

Figure 14 Peak Input Voltage to Match ADC Full-scale Range

ADC INPUT BLACK LEVEL ADJUST

The output from the PGA can be offset to match the full-scale range of the differential ADC (2*[VRT-

VRB]).

For negative-going input video signals, a black level (zero differential) output from the PGA should be

offset to the top of the ADC range by setting register bits PGAFS[1:0]=10. This will give an output

code of FFFF (hex) from the WM8214 for zero input. If code zero is required for zero differential

input then the INVOP bit should be set.

For positive going input signals the black level should be offset to the bottom of the ADC range by

setting PGAFS[1:0]=11. This will give an output code of 0000 (hex) from the WM8214 for zero input.

Bipolar input video is accommodated by setting PGAFS[1:0]=00 or PGAFS[1:0]=01. Zero differential

input voltage gives mid-range ADC output, 7FFF (hex).

WM8214SCDS/R Scheda tecnica(PDF) 18 Page - Wolfson Microelectronics plc