DSP56303 datasheet(154/292 Pages) FREESCALE

154 / 292 page

DSP56303 User’s Manual, Rev. 2

7-22

Freescale Semiconductor

Enhanced Synchronous Serial Interface (ESSI)

SCD1

Serial Control Direction 1

In Synchronous mode (SYN = 1) when transmitter 2 is disabled (TE2 = 0),

or in Asynchronous mode (SYN = 0), SCD1 controls the direction of the

SC1 I/O signal. When SCD1 is set, SC1 is an output; when SCD1 is

cleared, SC1 is an input. When TE2 is set, the value of SCD1 is ignored

and the SC1 signal is always an output.

SCD0

Serial Control Direction 0

In Synchronous mode (SYN = 1) when transmitter 1 is disabled (TE1 = 0),

or in Asynchronous mode (SYN = 0), SCD0 controls the direction of the

SC0 I/O signal. When SCD0 is set, SC0 is an output; when SCD0 is

cleared, SC0 is an input. When TE1 is set, the value of SCD0 is ignored

and the SC0 signal is always an output.

OF1

Serial Output Flag 1

In Synchronous mode (SYN = 1), when transmitter 2 is disabled (TE2 = 0),

the SC1 signal is configured as ESSI flag 1. When SCD1 is set, SC1 is an

output. Data present in bit OF1 is written to SC1 at the beginning of the

frame in Normal mode or at the beginning of the next time slot in Network

mode.

0OF0

Serial Output Flag 0

In Synchronous mode (SYN = 1), when transmitter 1 is disabled (TE1 = 0),

the SC0 signal is configured as ESSI flag 0. When SCD0 is set, the SC0

signal is an output. Data present in Bit OF0 is written to SC0 at the

beginning of the frame in Normal mode or at the beginning of the next time

slot in Network mode.

Table 7-4. ESSI Control Register B (CRB) Bit Definitions (Continued)

Bit Number

Bit Name

Reset Value

Description

DSP56303 Scheda tecnica(PDF) 154 Page - Freescale Semiconductor, Inc