www.austriamicrosystems.com

Revision 1.00

10 - 41

AS5130

Data Sheet - D e ta i l e d D e s c r i p t i o n

7 Detailed Description

Connecting the AS5130

The AS5130 can be connected to an external controller in several ways as listed below:

Serial 3-wire connection (default setting)

Serial 3-wire connection (OTP programming option)

1-wire PWM connection

Analog output

Analog Sin/Cos outputs with external interpolator

Serial 3-Wire Connection (Default Setting)

In this mode, the AS5130 is connected to the external controller via three SSI signals: Chip Select (CS), Clock (CLK)

input and DIO (Data) in/output. This configuration not only helps to read and write data but also defines different

operation modes. The data transfer in all cases is done via the DIO port.

Figure 3. Standard SSI Serial Data Interface

micro

controller

AS5130

100n

+5V

CS

CLK

DIO

AS5130