STM32W108CB datasheet(57/179 Pages) STMICROELECTRONICS

57 / 179 page

STM32W108CB, STM32W108HB

General-purpose input/outputs

Doc ID 16252 Rev 2

57/179

6.5.6

Port x output set register (GPIO_PxSET)

Address offset: 0xB010 (GPIO_PASET), 0xB410 (GPIO_PBSET)

and 0xB810 (GPIO_PCSET)

Reset value:

0x0000 0000

[7] Px7: Write 1 to clear the output data bit for Px7 (writing 0 has no effect).

[6] Px6: Write 1 to clear the output data bit for Px6 (writing 0 has no effect).

[5] Px5: Write 1 to clear the output data bit for Px5 (writing 0 has no effect).

[4] Px4: Write 1 to clear the output data bit for Px4 (writing 0 has no effect).

[3] Px3: Write 1 to clear the output data bit for Px3 (writing 0 has no effect).

[2] Px2: Write 1 to clear the output data bit for Px2 (writing 0 has no effect).

[1] Px1: Write 1 to clear the output data bit for Px1 (writing 0 has no effect).

[0] Px0: Write 1 to clear the output data bit for Px0 (writing 0 has no effect).

Reserved

Px7

Px6

Px5

Px4

Px3

Px2

Px1

Px0

[15:8] Reserved: these bits must be set to 0.

[7] Px7: Write 1 to set the output data bit for Px7 (writing 0 has no effect).

[6] Px6: Write 1 to set the output data bit for Px6 (writing 0 has no effect).

[5] Px5: Write 1 to set the output data bit for Px5 (writing 0 has no effect).

[4] Px4: Write 1 to set the output data bit for Px4 (writing 0 has no effect).

[3] Px3: Write 1 to set the output data bit for Px3 (writing 0 has no effect).

[2] Px2: Write 1 to set the output data bit for Px2 (writing 0 has no effect).

[1] Px1: Write 1 to set the output data bit for Px1 (writing 0 has no effect).

[0] Px0: Write 1 to set the output data bit for Px0 (writing 0 has no effect).

STM32W108CB Scheda tecnica(PDF) 57 Page - STMicroelectronics