10

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATING THE CONTROLS

1. Low Speed Indicator

2. High Speed Indicator

3. Danger Indicator

4. Battery Level Indicator

5. Power On/Off Button

6. Low/High, SELECT Button

To start, press the On button for 1 second until the blower starts.

• The Danger, Low Speed, High Speed Indicator lights come on, then

go out, the alarm sounds and the blower vibrates momentarily.

The blower always starts at the low speed. Press the SELECT button on the filter

casing to switch between Low and High Speeds.

To Stop: Press Off button 1 seconds until the audible alarm and blower stop.

The Danger indicator light comes on, the alarm sounds and the blower

vibrates if battery power is low or air flow is reduced due to a dirty filter,

blocked breathing hose or other fault.

The Battery Level indicator light shows the power remaining in the battery.

• Green light: - battery level > 90%

• Yellow light: - 30% battery level < 90%

• Red light: -10% battery level < 30%

• Red light flash: - battery level < l0%