13

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SECTION 3-AUTO-DARKENING WELDING HELMET

The Solar-Powered Auto-Darkening Welding Helmet is suitable for most

welding and grinding applications. This helmet comes with a 1/30,000-second

switching time which automatically darkens the lens the moment you start

welding. No matter what shade the filter is set to, the UV/IR protection is

always present.

CAUTION:

ARC RAYS CAN INJURE EYES AND BURN SKIN

Before welding, always inspect the helmet and auto-darkening filter (ADF) to

be sure they are fitted properly and in good condition. Keep the sensors, solar

cell and filter lens clean. Clean the filter cartridge using a soapy water solution

and soft cloth. DO NOT use solvents or abrasive cleaning detergent.

DO NOT weld in the overhead position while using this helmet.

Inspect the filter lens frequently and immediately replace any scratched,

cracked or pitted filter lens or cover lenses.

ALWAYS wear protective clothing to protect your skin from radiation, burns and

welding spatter.

1

Solar Panel

5

Grind/Weld Switch

2

Arc Sensor

6

Delay Control Knob

3

UV/IR Filter

7

Shade number control knob

4.

Sensitivity Control Knob

8

CR2450 Lithium Battery (inside)