12

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

Continue blocking the air flow until

the alarm sounds and the blower

vibrates.

If the alarm does not sound and the

blower does not vibrate, check the

battery and filter element.

CHECKING THE RESPIRATOR BEFORE USE

Before using the respirator, check the following items:

1. Verify the air filter is undamaged and securely connected to the blower

assembly.

2. Be sure the breathing hose is undamaged and properly connected to the

blower assembly and hood.

3. Verify the battery is fully charged and securely connected to the blower

assembly.

4. Test the air flow as above.

5. Turn on the blower and check for audible, visual and vibratory airflow

alarms.

6. Inspect the face seal and replace if damaged.

PUTTING ON THE RESPIRATOR

Place the blower assembly against your lower back with the breathing hose

extending upwards. Fasten the belt around your waist and adjust so as to

make a comfortable fit.