H8S2245 datasheet(21/818 Pages) RENESAS

21 / 818 page

Rev.3.00 Mar. 26, 2007 Page xxi of xlii

REJ09B0355-0300

Item

Page Revision (See Manual for Details)

13.2.2 Serial Status

479

Note

* added

Notes: etu: ...

* DTC can clear this bit only when DISEL is 0 with the transfer

counter not being 0.

13.3.4 Register Settings 486

SCR Setting

Description amended

... When the GM bit in SMR is cleared to 0, set these bits to B'00

if a clock is not to be output, or to B'01 if a clock is to be output.

...

13.3.6 Data Transfer

Operations

495

Fixing Clock Output Level

Description amended

When the GM bit in SMR is set to 1, ... In this example, GM is set

to 1, ...

496

Data Transfer Operation by DTC

Description amended

... If the TXI request is designated beforehand as a DTC

activation source, the DTC will be activated by the TXI request,

and transfer of the transmit data will be carried out. When DISEL

in DTC is 0 and the transfer counter value is not 0, the TDRE and

TEND flags are automatically cleared to 0 when data transfer is

performed. If DISEL is 1, or if DISEL is 0 and the transfer counter

value is 0, the DTC writes the transfer data to TDR but does not

clear the flags. Therefore, the flags should be cleared by the

CPU. In the event of an error, the SCI retransmits the same data

automatically. The TEND flag remains cleared to 0 during this

time, and the DTC is not activated. Thus, the number of bytes

specified by the SCI and DTC are transmitted automatically even

in retransmission following an error. However, the ERS flag is not

cleared ...

497

... If the RXI request is designated beforehand as a DTC

activation source, the DTC will be activated by the RXI request,

and transfer of the receive data will be carried out. At this time,

the RDRF flag is cleared to 0 if DISEL in DTC is 0 and the

transfer counter value is not 0. If DISEL is 1, or if DISEL is 0 and

the transfer counter value is 0, the DTC transfers the receive

data but does not clear the flag. Therefore, the flag should be

cleared by the CPU. If an error occurs, an error flag is set but the

RDRF flag is not.

H8S2245 Scheda tecnica(PDF) 21 Page - Renesas Technology Corp

H8S2245 Scheda tecnica(HTML) 21 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL