MPC8377ECVRAGDA datasheet(55/124 Pages) FREESCALE

55 / 124 page

MPC8377E PowerQUICC™ II Pro Processor Hardware Specifications, Rev. 2

Freescale Semiconductor

Figure 37 provides the AC test load for the I2C.

Figure 37. I2C AC Test Load

Figure 38 shows the AC timing diagram for the I2C bus.

Figure 38. I2C Bus AC Timing Diagram

Data hold time

CBUS compatible masters

I2C bus devices

tI2DXKL

—

0.9

μs2, 3

Setup time for STOP condition

tI2PVKH

0.6

—

μs—

Bus free time between a STOP and START condition

tI2KHDX

1.3

—

μs—

Noise margin at the LOW level for each connected device (including

hysteresis)

VNL

0.1

× OVDD

—V

—

Noise margin at the HIGH level for each connected device (including

hysteresis)

VNH

0.2

× OVDD

—V

—

Note:

1 The symbols used for timing specifications herein follow the pattern of t

(first two letters of functional block)(signal)(state) (reference)(state)

for inputs and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example, tI2DVKH symbolizes I

2C timing

(I2) with respect to the time data input signals (D) reach the valid state (V) relative to the tI2C clock reference (K) going to the

high (H) state or setup time. Also, tI2SXKL symbolizes I

2C timing (I2) for the time that the data with respect to the start condition

(S) went invalid (X) relative to the tI2C clock reference (K) going to the low (L) state or hold time. Also, tI2PVKH symbolizes I

timing (I2) for the time that the data with respect to the stop condition (P) reaching the valid state (V) relative to the tI2C clock

reference (K) going to the high (H) state or setup time. For rise and fall times, the latter convention is used with the appropriate

letter: R (rise) or F (fall).

2 MPC8377E provides a hold time of at least 300 ns for the SDA signal (referred to the V

IHmin of the SCL signal) to bridge the

undefined region of the falling edge of SCL.

3 The maximum t

I2DVKH has only to be met if the device does not stretch the LOW period (tI2CL) of the SCL signal.

Table 46. I2C AC Electrical Specifications (continued)

All values refer to VIH (min) and VIL (max) levels (see Table 45).

Parameter

Symbol1

Min

Max

Unit

Notes

Output

Z0 = 50 Ω

OVDD/2

RL = 50 Ω

SDA

SCL

tI2CF

tI2SXKL

tI2CL

tI2CH

tI2DXKL

tI2DVKH

tI2SXKL

tI2SVKH

tI2KHKL

tI2PVKH

tI2CR

tI2CF

MPC8377ECVRAGDA Scheda tecnica(PDF) 55 Page - Freescale Semiconductor, Inc

MPC8377ECVRAGDA Scheda tecnica(HTML) 55 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL