200

RoHS Compliant, ELV Compliant

10

Test

Conditions

Passive aging

60°C, 1000 hours

85°C, 1000 hours

Humidity aging

85°C, 85% RH, 1000 hours

Storage humidity

Per IPC/JEDEC J-STD-020A Level 2a

Thermal shock

125°C, -55°C (10 times)

Solvent resistance

MIL-STD-202, Method 215J

Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded.

Terminal material

Tin-plated brass

Insulating material

Nylon resin (UL94V-0), 1000V dielectric rating

Flammability

IEC 695-2-2 Needle Flame Test for 20s

Soldering characteristics

EIC60068-2-58, Method 7

Solder heat withstand

IEC-STD 68-2-20, Test Tb, Section 5 Method 1A

TSM600†

Physical Characteristics

Environmental Specifications

Operating temperature range for all listed products is -40°C to 85°C, except for TRF250-080T and TRF250-184 (0°C to 85°C)

Table T5

Physical Characteristics and Environmental Specifications for

Telecommunications and Networking Devices

Cont’d

Test

Conditions

Passive aging

60°C, 1000 hours

85°C, 1000 hours

Humidity aging

85°C, 85% RH, 1000 hours

Thermal shock

125°C, -55°C (10 times)

Solvent resistance

MIL-STD-202, Method 215F

Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded.

Terminal material

Tin-plated brass

Insulating material

Nylon resin (UL94V-0), 1000V dielectric rating

Flammability

IEC 695-2-2 Needle Flame Test for 20s

Soldering characteristics

ANSI/J-STD-002, Category 3

Solder heat withstand

IEC-STD 68-2-20, Test Tb, Section 5 Method 1A

TS600†

Physical Characteristics

Environmental Specifications