INA149-EP

www.ti.com

SBOS608A – MARCH 2012 – REVISED APRIL 2012

THERMAL INFORMATION

INA149

D (SOIC)

UNITS

8 PINS

110

57

54

°C/W

11

53

N/A

(1)

For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

(2)

The junction-to-ambient thermal resistance under natural convection is obtained in a simulation on a JEDEC-standard, high-K board, as

specified in JESD51-7, in an environment described in JESD51-2a.

(3)

The junction-to-case (top) thermal resistance is obtained by simulating a cold plate test on the package top. No specific JEDEC-

standard test exists, but a close description can be found in the ANSI SEMI standard G30-88.

(4)

The junction-to-board thermal resistance is obtained by simulating in an environment with a ring cold plate fixture to control the PCB

temperature, as described in JESD51-8.

(5)

The junction-to-top characterization parameter,

from the simulation data for obtaining

(6)

The junction-to-board characterization parameter,

from the simulation data for obtaining

(7)

The junction-to-case (bottom) thermal resistance is obtained by simulating a cold plate test on the exposed (power) pad. No specific

JEDEC standard test exists, but a close description can be found in the ANSI SEMI standard G30-88.

Copyright © 2012, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Link(s): INA149-EP