POE576U-4MP-N-R datasheet(24/45 Pages) PHIHONG

24 / 45 page

Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678

www.phihong.com or www.midspans.com

-24-

3.5

System Tools

This System Tools webpage allows user to execute the following 3 tasks:

1. Upload Firmware

Upload the binary ﬁle POEB-x.x.x.bin (web/SNMP image) into the midspan‘s internal EEPROM

directly. Note that if a new version of ﬁrmware is released, in order to update, you ﬁrst must use the

Windows TFTP command to upload POEA-x.x.x.bin into the midspan‘s internal microprocessor,

then upload POEB-x.x.x.bin. Please review Chapter 5: Firmware Updating at Field for more details

regarding TFTP uploading.

To upload web/SNMP image, using the Browser button to locate ﬁle POEB-x.x.x.bin, then click on

the Upload button. If the upload is successful, a new page will display the message <Software

Update Successful>. Click on the link referencing the site main page to be redirected to the newly

updated controller.

2. Reboot Midspan.

In addition to the Reboot button, there is an input-box for time associated with the Reboot button.

The Seconds input-box speciﬁes the time for the boot loader to wait for a TFTP ﬁrmware upload

after a power reset. Read Chapter 5: Firmware Updating at Field for more details regarding a TFTP

upload.

Choose 0 seconds for a normal reboot. If you have uploaded the POEA-x.x.x.bin via TFTP boot

load, then a value of at least 6 must be input prior to clicking the Reboot button, then the page will

be redirected to the Reboot webpage. Note that the POE ports will be turned off while the boot

loader is waiting for an upload, however, if a reboot of 0 seconds (fast reset) is selected, the power

across the ports in use will not experience any interruption.

3. Restore Defaults.

The Restore Defaults button restores midspan to the factory defaults, and redirects the user to the

Rebooting page.

Review the following default settings for your Phihong midspan.

hostname: phihong-xxxxxx where ‘xxxxxx’ is the last 6 characters of the midspan’s MAC address.

user name: admin (case sensitive)

password: admin (case sensitive)

DHCP: enabled

read-write community: Phihong

read-only community: Phihong-read-only

POE576U-4MP-N-R Scheda tecnica(PDF) 24 Page - Phihong USA Inc.