MB90437LPF datasheet(28/61 Pages) CYPRESS

28 / 61 page

MB90435 Series

DS07-13727-2E

*1 : The interrupt request flag is cleared by the EI2OS interrupt clear signal.

*2 : The interrupt request flag is cleared by the EI2OS interrupt clear signal. A stop request is available.

Notes :

• N/A : The interrupt request flag is not cleared by the EI2OS interrupt clear signal.

• For a peripheral module with two interrupt causes for a single interrupt number, both interrupt request flags

are cleared by the EI2OS interrupt clear signal.

• At the end of EI2OS, the EI2OS clear signal will be asserted for all the interrupt flags assigned to the same

interrupt number. If one interrupt flag starts the EI2OS and in the meantime another interrupt flag is set by

a hardware event, the later event is lost because the flag is cleared by the EI2OS clear signal caused by the

first event. So it is recommended not to use the EI2OS for this interrupt number.

• If EI2OS is enabled, EI2OS is initiated when one of the two interrupt signals in the same interrupt control

which should be unique for each interrupt source. For this reason, when one interrupt source uses the

EI2OS, the other interrupt should be disabled.

MB90437LPF Scheda tecnica(PDF) 28 Page - Cypress Semiconductor