Datasheet

Advanced sensor for use with plastic fiber optics

•

single-point programming plus manual adjustment for fine-tuning

•

16-bit microcontroller and 12-bit Analog-to-Digital converter for high-

performance, low-contrast sensing

•

Easy-to-read 4-digit display for TEACH and signal strength readout, plus

indicators for a continuous readout of operating status (user configurable)

•

Two discrete outputs, PNP or NPN

•

Four-mode power and speed selection with automatic cross-talk avoidance

circuitry

•

Selectable OFF-delay options

•

Gate input wire can be used to selectively inhibit sensor outputs from switching

•

Models available with visible red (680 nm) or visible green (525 nm) sensing

beam

•

Models available with 2 m or 9 m (6.5 ft or 30 ft) cable or integral Pico-style

quick-disconnect

•

Sleek, ultra-slim 10 mm housing, mounts to a standard 35 mm DIN rail

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Models

Red Beam Models

Green Beam Models

Discrete Outputs

D10DNFP

D10DNFPG

2 m (6.5 ft) Cable

NPN

D10DNFPQ

D10DNFPGQ

6-pin Pico-style QD

D10DPFP

D10DPFPG

2 m (6.5 ft) Cable

PNP

D10DPFPQ

D10DPFPGQ

6-pin Pico-style QD

1 U.S. Patent #5,808,296

2 To order the 9 m (30 ft) PVC cable model, add the suffix "W/30" to the cabled model number. For example, D10DNFP W/30. Models with a quick disconnect

require a mating cordset.

Original Document

64154 Rev. G

8 December 2016

64154