LP87702 datasheet(23/98 Pages) TI

Il numero della parte	LP87702

Spiegazioni elettronici	LP87702 Dual Buck Converter and 5-V Boost With Diagnostic Functions

PDF	98 Pages

Scroll/Zoom	100%

Produttore elettronici	TI [Texas Instruments]

Homepage	http://www.ti.com

Logo

23 / 98 page

Enable

Time

Voltage

Resistive pull-down

(if enabled)

BOOST_VSET[1:0]

INT_BOOST(BOOST_PG_INT)

nINT

Host clears

interrupts

Powergood

interrupts

BOOST_STATUS(BOOST_PG_STAT)

Voltage decrease because of load

BOOST_STATUS(BOOST_STAT)

0 1

BOOST_MASK(BOOST_PGF_MASK) = 0

BOOST_MASK(BOOST_PGR_MASK) = 0

BOOST_WINDOW[1:0]

Figure 7-5. Boost Converter Enable and Disable

7.3.6.2 Changing Buck Output Voltage

The output voltage of BUCKx converter can be changed by writing to the BUCKx_VOUT register. The

voltage change for buck converter is always slew-rate controlled, and the slew-rate is defined by the

BUCKx_SLEW_RATE[2:0] bits in BUCKx_CTRL_2 register. The forced PWM mode is used automatically during

a voltage change. When the programmed output voltage is achieved, the mode becomes the one defined by

load current, and the BUCKx_FPWM bit.

Figure 7-6 shows the voltage change and power-good interrupts.

www.ti.com

LP87702

SNVSBU3 – MARCH 2021

Submit Document Feedback

Product Folder Links: LP87702

LP87702 Scheda tecnica(PDF) 23 Page - Texas Instruments