IMX8ULPCEC datasheet(60/105 Pages) NXP

60 / 105 page

5.4.4.1 Ethernet Controller (ENET) AC electrical specifications

The following timing specifications are defined at the chip I/O pin and must be translated appropriately to arrive at timing

specifications/constraints for the physical interface.

5.4.4.1.1 ENET MII mode timing

5.4.4.1.1.1 MII receive signal timing (ENET_RX_DATA3,2,1,0, ENET_RX_EN, ENET_RX_ER, and

ENET_RX_CLK)

The receiver functions correctly up to an ENET_RX_CLK maximum frequency of 25 MHz + 1%. There is no minimum

frequency requirement. Additionally, the processor clock frequency must exceed twice the ENET_RX_CLK frequency.

The following table describes MII receive signal timings and the figure below depicts the timing parameters (M1–M4).

Table 38. MII receive signal timing

Characteristic

Min.

Max.

Unit

ENET_RX_DATA3,2,1,0,

ENET_RX_EN, ENET_RX_ER to

ENET_RX_CLK setup

ENET_RX_CLK to

ENET_RX_DATA3,2,1,0,

ENET_RX_EN, ENET_RX_ER hold

ENET_RX_CLK pulse width high

35%

65%

ENET_RX_CLK period

ENET_RX_CLK pulse width low

35%

65%

ENET_RX_CLK period

ENET_RX_CLK (input)

ENET_RX_DATA3,2,1,0

ENET_RX_ER

ENET_RX_EN

(inputs)

Figure 17. MII receive signal timing diagram

5.4.4.1.1.2 MII transmit signal timing (ENET_TX_DATA3,2,1,0, ENET_TX_EN, ENET_TX_ER, and

ENET_TX_CLK)

The transmitter functions correctly up to an ENET_TX_CLK maximum frequency of 25 MHz + 1%. There is no minimum

frequency requirement. Additionally, the processor clock frequency must exceed twice the ENET_TX_CLK frequency.

The table below describes the timing parameters (M5–M8).

NXP Semiconductors

Specifications—application domain

i.MX 8ULP Applications Processor—Commercial Products, Rev. 1, 09/2023

Data Sheet: Technical Data

60 / 105

IMX8ULPCEC Scheda tecnica(PDF) 60 Page - NXP Semiconductors

IMX8ULPCEC Scheda tecnica(HTML) 60 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL