TMD3721 datasheet(35/89 Pages) OSRAM

35 / 89 page

Page 34

Datasheet, Public

Document Feedback

[v3-00] 2023-May-26

TMD3721 − Register O ver view

PCFG1 Register (Address 0x8F)

Figure 41:

PCFG1 Register

The PPULSE field sets the maximum number of IR VCSEL pulses

that may occur in a proximity cycle. The proximity engine will

automatically continue to add IR VCSEL pulses, up to the value

set in PPULSE or if a near-saturation condition occurs if

Automatic Pulse Control (APC) is enabled. The dynamic range

of the sensor is automatically adjusted to detect distant targets

as well as prevent saturation from close targets. This operation

also reduces power consumption because proximity

integration period is automatically shortened when a target is

close to the sensor.

If Automatic Pulse Control (APC) is disabled by setting bit 6 in

CFG6 to 1, then PPULSE always determines the number of

proximity pulses to be transmitted.

Addr: 0x8F

PCFG1

Bit

Bit Name

Default

Access

Bit Description

7:6

PPULSE_LENH

These bits are the 2 most significant bits of the 10-bit

Pulse Length control setting. The lower 8 bits are in

the PCFG2 register. See the PCFG2 register for

details.

5:0

PPULSE

000000

Maximum number of pulses in a single proximity

cycle.

Value

Maximum Number of Pulses

0 (000000)

1 (000001)

2 (000010)

...

63 (111111)

TMD3721 Scheda tecnica(PDF) 35 Page - OSRAM GmbH

TMD3721 Scheda tecnica(HTML) 35 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89

Scheda tecnica Scarica

Link URL