| Motore di ricerca datesheet componenti elettronici |
|
STPMC1 Scheda tecnica(PDF) 36 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STPMC1 Scheda tecnica(HTML) 36 Page - STMicroelectronics |
|
36 / 77 page ![]() Theory of operation STPMC1 36/77 Doc ID 15728 Rev 6 From signal PΣ (3-ph active energy), stepper motor driving signals MA and MB (see Figure 12) are generated by means of internal divider, mono-flop and decoder and brought to MOP and MON pins. The numbers of pulses per kWh on MOP and MON outputs (CM) is related to the number of pulses on LED pin (C, see par. 9.11) following the table below. The mono-flop limits the length of the pulses according to the LVS bit value. The decoder distributes the pulses to MA and MB alternatively, which means that each of them has only a half of selected frequency. When a no-load condition is detected ( BIL=1) MOP and MON are held low because integration of power is suspended. The LED pin provides 3-phase active energy pulses according to the table below: Figure 12. Stepper driving signals MON Hi Hi Low Low MOP MON Hi Hi Low Low MOP Table 20. Configuration of MOP and MON driving signals with APL = 1, 2, 3 LVS (1 bit) KMOT (2 bits) Pulses Length Freq. CM 0 0 31.25 ms C/64 1 C/128 2C/32 3 C/256 1 0 156.25 ms C/640 1 C/1280 2 C/320 3 C/2560 |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |