TPS25751D datasheet(40/89 Pages) TI1

40 / 89 page

Figure 8-24. BC1.2 Hardware Components

8.3.9 Digital Interfaces

The TPS25751 contains several different digital interfaces which can be used for communicating with other

devices. The available interfaces include one I2C controller, one I2C target and additional GPIOs.

8.3.9.1 General GPIO

GPIOn pins can be mapped to USB Type-C, USB PD, and application-specific events to control other ICs,

interrupt a host processor, or receive input from another IC. This buffer is configurable to be a push-pull output,

a weak push-pull, or open drain output. When configured as an input, the signal can be a de-glitched digital

input . The push-pull output is a simple CMOS output with independent pull-down control allowing open-drain

connections. The weak push-pull is also a CMOS output, but with GPIO_RPU resistance in series with the drain.

The supply voltage to the output buffer is LDO_3V3 and LDO_1V5 to the input buffer. When interfacing with non

3.3-V I/O devices the output buffer can be configured as an open drain output and an external pull-up resistor

attached to the GPIO pin. The pull-up and pull-down output drivers are independently controlled from the input

and are enabled or disabled via application code in the digital core.

Table 8-3. GPIO Functionality Table

PIN NAME

TYPE

SPECIAL FUNCTIONALITY

GPIO0

I/O

General-purpose input or output

GPIO1

I/O

General-purpose input or output

GPIO2

I/O

General-purpose input or output

GPIO3

I/O

General-purpose input or output

GPIO4

I/O

D+, general-purpose input or output, or LD1 for Liquid Detection

GPIO5

I/O

D-, general-purpose input or output, or LD2 for Liquid Detection

GPIO6

I/O

General-purpose input or output

GPIO7

I/O

General-purpose input or output

I2Ct_IRQ(GPIO10)

IRQ for optional I2Ct, or used as a general-purpose output

GPIO11

General-purpose output

I2Cc_IRQ(GPIO12)

IRQ for I2Cc, or used as a general-purpose input

8.3.9.2 I2C Interface

The TPS25751 features two I2C interfaces that uses an I2C I/O driver like the one shown in Figure 8-25. This I/O

consists of an open-drain output and an input comparator with de-glitching.

TPS25751

SLVSH93 – OCTOBER 2023

www.ti.com

Submit Document Feedback

Product Folder Links: TPS25751

TPS25751D Scheda tecnica(PDF) 40 Page - Texas Instruments

TPS25751D Scheda tecnica(HTML) 40 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89

Scheda tecnica Scarica

Link URL