| Motore di ricerca datesheet componenti elettronici |
|
STR750FV2 Scheda tecnica(PDF) 32 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STR750FV2 Scheda tecnica(HTML) 32 Page - STMicroelectronics |
|
32 / 81 page ![]() Electrical parameters STR750Fxx STR751Fxx STR752Fxx STR755Fxx 32/81 5.2 Absolute maximum ratings Stresses above those listed as “absolute maximum ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device under these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. 5.2.1 Voltage characteristics Table 7. Voltage characteristics Symbol Ratings Min Max Unit VDD_x - VSS_X (1) 1. All 3.3 V or 5.0 V power (VDD_IO, VDDA_ADC, VDDA_PLL) and ground (VSS_IO, VSSA_ADC, VDDA_ADC) pins must always be connected to the external 3.3V or 5.0V supply. When powered by 3.3V, I/Os are not 5V tolerant. Including VDDA_ADC and VDDA_PLL -0.3 6.5 V V18 - VSS18 Digital 1.8 V Supply voltage on all V18 power pins (when 1.8 V is provided externally) -0.3 2.0 VIN Input voltage on any pin (2) 2. IINJ(PIN) must never be exceeded. This is implicitly insured if VIN maximum is respected. If VIN maximum cannot be respected, the injection current must be limited externally to the IINJ(PIN) value. A positive injection is induced by VIN>VDD while a negative injection is induced by VIN<VSS. For true open-drain pads, there is no positive injection current, and the corresponding VIN maximum must always be respected VSS-0.3 to VDD_IO+0.3 VSS-0.3 to VDD_IO+0.3 | ∆VDDx| Variations between different 3.3 V or 5.0 V power pins 50 mV | ∆V18x| Variations between different 1.8 V power pins(3) 3. Only when using external 1.8 V power supply. All the power (V18, V18REG, V18BKP) and ground (VSS18, VSSBKP) pins must always be connected to the external 1.8 V supply. 25 |VSSX - VSS| Variations between all the different ground pins 50 VESD(HBM) Electro-static discharge voltage (Human Body Model) see : Absolute Maximum Ratings (Electrical Sensitivity) on page 52 see : Absolute Maximum Ratings (Electrical Sensitivity) on page 52 VESD(MM) Electro-static discharge voltage (Machine Model) |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |