PL460 datasheet(9/48 Pages) MICROCHIP

Il numero della parte	PL460

Spiegazioni elettronici	programmable modem designed for narrow-band Power Line Communication (PLC)

PDF	48 Pages

Scroll/Zoom	100%

Produttore elettronici	MICROCHIP [Microchip Technology]

Homepage	http://www.microchip.com

Logo

9 / 48 page

PL460

Signal Description

Data Sheet

DS60001666D - 9

11. It is recommended to connect the NRST signal to a GPIO in the host controller with an internal

pull-down default reset configuration to help keep PL460 in reset until the host boots. For more

details, refer to Reset (NRST) Pin.

12. See Table 11-4.

13. VZC is not isolated; some isolation circuitry is required in case of using a non-isolated design.

Refer to the reference design for additional information.

14. Bypass to analog ground with an external 22 nF decoupling capacitor and connect an external 10

nF decoupling capacitor between VREFP and VREFN.

15. Bypass to analog ground with an external 10 nF decoupling capacitor.

16. The STBY signal must be connected to GND if the Sleep mode functionality is not used. If using

the Sleep mode functionality, the STBY signal must be connected to a GPIO in the host controller

with an internal pull-down default reset configuration to avoid enabling Sleep mode until the

host boots. For more details, refer to Standby (STBY) Pin.

17. See Table 11-5.

PL460 Scheda tecnica(PDF) 9 Page - Microchip Technology