M32CSLASH8B datasheet(89/406 Pages) RENESAS

89 / 406 page

Under development

M32C/8B Group

9. Clock Generation Circuits

Preliminary specification

Specifications in this manual are tentative and subject to change.

REJ09B0450-0050 Rev.0.50 Oct 31, 2008

Page 72 of 385

Figure 9.7

PM2 Register

b7 b6 b5 b4

Processor Mode Register 2(1)

Symbol

PM2

Address

0013h

Bit Symbol

Bit Name

−

(b0)

After Reset

00h

NOTES:

1. Set the PM2 register after the PRC1 bit in the PRCR register is set to 1 (write enable).

2. Once bits PM22 and PM21 are set to 1, they cannot be set to 0 by a program.

3. When the PM21 bit is set to 1,

• the CPU clock does not stop, even if the WAIT instruction is executed;

• writes to the following bits have no effect.

- the CM02 bit in the CM0 register

- the CM05 bit in the CM0 register

- the CM07 bit in the CM0 register (CPU clock source is not changed)

- the CM10 bit in the CM1 register (the MCU does not enter stop mode)

- the CM17 bit in the CM1 register (CPU clock source is not changed)

- the CM20 bit in the CM2 register (oscillation stop detect function setting is not changed)

- all bits in registers PLC0 and PLC1 (PLL frequency synthesizer setting is not changed)

4. When the PM22 bit is set to 1,

• the on-chip oscillator starts oscillating and the on-chip oscillator clock becomes the count source for the watchdog timer;

• write to the CM10 bit in the CM1 register is disabled (writing a 1 has no effect and the MCU does not enter stop mode);

• the watchdog timer keeps operating when the MCU is in wait mode or in hold state.

Function

b7 b6

0 0: Clock selected by the CM21 bit

0 1: XIN clock (fXIND)

1 0: On-chip oscillator clock (fROC)

1 1: Do not set to this value

Reserved bit

PM21

PM22

System clock protect bit(2, 3)

0: Protects a clock by the PRCR register

1: Disables a clock change

−

(b5-b3)

WDT count source protect bit(2, 4)

Set to 0

PM26

f2n clock source select bits

PM27

Reserved bits

Set to 0

0: CPU clock as count source for the watchdog

timer

1: On-chip oscillator clock as count source for

the watchdog timer

M32C/8B Scheda tecnica(PDF) 89 Page - Renesas Technology Corp

M32C/8B Scheda tecnica(HTML) 89 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL