M32CSLASH8B datasheet(229/406 Pages) RENESAS

229 / 406 page

Under development

M32C/8B Group

17. Serial Interfaces

Preliminary specification

Specifications in this manual are tentative and subject to change.

REJ09B0450-0050 Rev.0.50 Oct 31, 2008

Page 212 of 385

17.1.1.1 CLK Polarity

As shown in figure 17.14, the CKPOL bit in the UiC0 register (i = 0 to 4) determines the polarity of the serial

clock.

Figure 17.14

Serial Clock Polarity

CLKi

(1) When the CKPOL bit in the UiC0 register (i = 0 to 4) is set to 0 (transmit data output at the

falling edge and receive data input at the rising edge of the serial clock )

(2) When the CKPOL bit is set to 1 (transmit data output at the rising edge and receive data input

at the falling edge of the serial clock)

TXDi

RXDi

The above applies under the following conditions:

- UFORM bit in the UiC0 register is set to 0 (LSB first)

- UiLCH bit in the UiC1 register is set to 0 (not inverted).

NOTES:

1. The CLKi pin output level is "H" when no transmit and receive operation is in progress.

2. The CLKi pin output level is "L" when no transmit and receive operation is in progress.

"H"

"L"

"H"

"L"

"H"

"L"

CLKi

TXDi

RXDi

"H"

"L"

"H"

"L"

"H"

"L"

(note 1)

(note 2)

M32C/8B Scheda tecnica(PDF) 229 Page - Renesas Technology Corp

M32C/8B Scheda tecnica(HTML) 229 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL