MSP430F5529 datasheet(63/115 Pages) TI

63 / 115 page

MSP430F551x

MSP430F552x

www.ti.com

SLAS590D – OCTOBER 2009 – REVISED APRIL 2010

PMM, SVM Low Side

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

SVMLE = 0, PMMCOREV = 2

I(SVML)

SVML current consumption

SVMLE= 1, PMMCOREV = 2, SVMLFP = 0

200

SVMLE= 1, PMMCOREV = 2, SVMLFP = 1

1.5

µA

SVMLE = 1, dVCORE/dt = 10 mV/µs,

2.5

SVMLFP = 1

tpd(SVML)

SVML propagation delay

µs

SVMLE = 1, dVCORE/dt = 1 mV/µs,

SVMLFP = 0

SVMLE = 0

→ 1

12.5

SVMLFP = 1

t(SVML)

SVML on/off delay time

µs

SVMLE = 0

→ 1

100

SVMLFP = 0

Wake-up from Low Power Modes and Reset

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

Wake-up time from LPM2,

PMMCOREV = SVSMLRRL = n,

fMCLK ≥ 4.0 MHz

tWAKE-UP-FAST

LPM3, or LPM4 to active

where n = 0, 1, 2, or 3

µs

fMCLK < 4.0 MHz

mode(1)

SVSLFP = 1

Wake-up time from LPM2,

PMMCOREV = SVSMLRRL = n, where n = 0, 1, 2,

tWAKE-UP-SLOW

LPM3 or LPM4 to active

or 3

150

165

µs

mode(2)

SVSLFP = 0

Wake-up time from LPM4.5 to

tWAKE-UP-LPM5

active mode(3)

Wake-up time from RST or

tWAKE-UP-RESET

BOR event to active mode(3)

(1)

This value represents the time from the wakeup event to the first active edge of MCLK. The wakeup time depends on the performance

mode of the low side supervisor (SVSL) and low side monitor (SVML). Fastest wakeup times are possible with SVSLand SVML in full

performance mode or disabled when operating in AM, LPM0, and LPM1. Various options are available for SVSLand SVML while

operating in LPM2, LPM3, and LPM4. Please refer to the Power Management Module and Supply Voltage Supervisor chapter in the

MSP430x5xx Family User's Guide (SLAU208).

(2)

This value represents the time from the wakeup event to the first active edge of MCLK. The wakeup time depends on the performance

mode of the low side supervisor (SVSL) and low side monitor (SVML). In this case, the SVSLand SVML are in normal mode (low current)

mode when operating in AM, LPM0, and LPM1. Various options are available for SVSLand SVML while operating in LPM2, LPM3, and

LPM4. Please refer to the Power Management Module and Supply Voltage Supervisor chapter in the MSP430x5xx Family User's Guide

(SLAU208).

(3)

This value represents the time from the wakeup event to the reset vector execution.

Submit Documentation Feedback

MSP430F5529 Scheda tecnica(PDF) 63 Page - Texas Instruments

MSP430F5529 Scheda tecnica(HTML) 63 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL