| Motore di ricerca datesheet componenti elettronici |
|
UCS1003-3 Scheda tecnica(PDF) 24 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UCS1003-3 Scheda tecnica(HTML) 24 Page - Microchip Technology |
|
24 / 138 page ![]() 13 ALERT# Active-low error event output flag (requires pull-up resistor). OD Connect to ground 14 DPIN USB data input (plus). AIO Connect to ground or ground through a resistor 15 DMIN USB data input (minus). AIO Connect to ground or ground through a resistor 16 DMOUT USB data output (minus). AIO (Note 2) Connect to ground 17 DPOUT USB data output (plus). AIO (Note 2) Connect to ground 18 A_DET# (UCS1003-1 and UCS1003-3) Active-low device Attach Detection output flag (requires pull-up resistor). OD Connect to ground CHRG# (UCS1003-2) Active-low “Charging Active” output flag (requires pull-up resistor). OD Connect to ground 19 EM_EN Active mode selector input. DI Connect to ground or VDD (Note 3) 20 GND Ground. Power n/a 21 EP Exposed thermal pad. Must be connected to electrical ground. EP n/a TABLE 3-1: PIN FUNCTION TABLE (CONTINUED) UCS1003-1/2/3 4x4 QFN Symbol Function Pin Type Connection Type if Pin Not Used Note 1: Total leakage current from Pins 3 and 4 (VBUS) to ground must be less than 100 µA for proper Attach/Removal Detection operation. 2: It is recommended to use 2 M pull-down resistors on the DPOUT and/or DMOUT pin if a portable device stimulus is expected when using the customer charger emulation profile with the high-speed data switch open. The 2 M value is based on BC1.1 impedance characteristics for Dedicated Charging Ports. 3: To ensure operation, the PWR_EN pin must be enabled, as determined by the SEL pin decode, when it is not driven by an external device. Furthermore, one of the M1, M2 or EM_EN pins must be connected to VDD if all three are not driven from an external device. If the PWR_EN pin is disabled, or all of the M1, M2 and EM_EN pins are connected to ground, the UCS1003-1 will remain in the Sleep or Detect state unless activated via the SMBus (UCS1003-2 and UCS1003-3 will remain in Sleep or Detect state indefinitely). |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |