| Motore di ricerca datesheet componenti elettronici |
|
UCS1003-3 Scheda tecnica(PDF) 28 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UCS1003-3 Scheda tecnica(HTML) 28 Page - Microchip Technology |
|
28 / 138 page ![]() UCS1003-1/2/3 DS20005346B-page 28 2014-2015 Microchip Technology Inc. ILIM The IBUS current threshold used in current limiting. In Trip mode, when ILIM is reached, the port power switch is opened. In Constant-Current mode, when the current exceeds ILIM, oper- ation continues at a reduced voltage and increased current; if VBUS voltage drops below VBUS_MIN, the port power switch is opened. Legacy USB devices that require non-BC1.2 signatures to be applied on the DPOUT and DMOUT pins to enable charging. OCL Overcurrent Limit. POR Power-on Reset. Portable Device USB device attached to the USB port. Power Thief A USB device that does not follow the handshaking conventions of a BC1.2 device or legacy devices and draws current immediately upon receiving power (i.e., a USB book light, portable fan, etc). Removal Detection A Removal Detection event occurs when the current load on the VBUS pin drops to less than IREM_QUAL for longer than tREM_QUAL. Removal The physical removal of a portable device from a USB port that the UCS1003-1/2/3 is controlling. Response An action, usually in response to a stimulus, in charger emulation performed by the UCS1003-1/2/3 device via the USB data lines. SDP or USB-IF SDP Standard Downstream Port. The combination of the UCS1003-1/2/3 High-Speed Switch being closed with an upstream USB host present comprises a BC1.2 SDP. This enables a BC1.2 compliant portable device to simultaneously draw current up to 0.5A while data communication is active. Signature Application of a charger emulation profile without waiting for a response. One-way communication from the UCS1003-1/2/3 to the portable device. Stand-Alone Mode Indicates that the communication protocol is not active and all communications between the UCS1003-1/2/3 and a controller are done via the external pins only (M1, M2, EM_EN, PWR_EN, S0 and LATCH as inputs, and ALERT# and A_DET# as outputs). Stimulus An event in charger emulation detected by the UCS1003-1/2/3 device via the USB data lines. TABLE 4-1: TERMS AND ABBREVIATIONS (CONTINUED) Term/Abbreviation Description |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |