 |
Motore di ricerca datesheet componenti elettronici |
|
|
Motore di ricerca datesheet componenti elettronici |
|
UCS1003-3 Scheda tecnica(PDF) 114 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UCS1003-3 Scheda tecnica(HTML) 114 Page - Microchip Technology |
|
|
114 / 138 page  UCS1003-1/2/3 DS20005346B-page 114 2014-2015 Microchip Technology Inc. REGISTER 10-41: CUSTOM EMULATION STIMULUS 2 CONFIGURATION 2 REGISTER (ADDRESS 46h) R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 CS_S2_R2MAG<3:0> CS_S2_R2<3:0> bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown bit 7-4 CS_S2_R2MAG<3:0>: Stimulus 2 Response Magnitude bits Determines the magnitude of the response to the stimulus. The bit decode changes meaning based on which response was selected. Data written to any field that is identified as “Do not use” will not be accepted. The data will not be updated and the settings will remain set at the previous value. For CS_S2_R2 Settings 0000-0011 : The response is a voltage applied on the DPOUT/DMOUT pins. The CS_S2_R2MAG bits specify the voltage relative to ground. For CS_S2_R2 Settings 0100, 0111, 1101-1111 : The response is a resistor connected on DPOUT/DMOUT to GND or VBUS. The CS_S2_R2MAG bits specify the resistor value. For CS_S2_R2 Settings 0110, 1001, 1100 : The response is a voltage divider applied from VBUS to GND with “center” at DPOUT/DMOUT. The CS_S2_R2MAG bits specify the minimum resistance of the voltage divider (Sum of R1 + R2): Note 1: If STIM1<2:0> = 000b and no other response was applied to the DPOUT pin, the 15 k pull-down resistor applied to the DPOUT pin during emulation Reset is not removed. Otherwise, the previous response is left on the DPOUT pin (if applicable) or the 15 k pull-down resistor is removed. 2: If STIM1<2:0> = 000b and no other response was applied to the DMOUT pin, the 15 k pull-down resistor applied to the DMOUT pin during emulation Reset is not removed. Otherwise, the previous response is left on the DMOUT pin (if applicable) or the 15 k pull-down resistor is removed. 0000 = Pull Down 0110 = 600 mV 1100 = 1800 mV 0001 = 400 mV 0111 = 700 mV 1101 = 2000 mV 0010 = 400 mV 1000 = 800 mV 1110 = 2200 mV 0011 = 400 mV 1001 = 900 mV 1111 = Do not use 0100 = 400 mV 1010 = 1400 mV 0101 = 500 mV 1011 = 1600 mV 0000 =1.8 k 0110 =40 k 1100 = 100 k 0001 =10 k 0111 =43 k 1101 = 120 k 0010 =15 k 1000 =50 k 1110 = 150 k 0011 =20 k 1001 =60 k 1111 = Do not use 0100 =25 k 1010 =75 k 0101 =30 k 1011 =80 k 0000 =93 k 0110 = 200 k 1100 = 200 k 0001 = 100 k 0111 = 200 k 1101 = 200 k 0010 = 125 k 1000 =93 k 1110 = 200 k 0011 = 150 k 1001 = 100 k 1111 = Do not use 0100 = 200 k 1010 = 125 k 0101 = 200 k 1011 = 150 k |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Italian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
