LSM6DSOX datasheet(55/199 Pages) STMICROELECTRONICS

55 / 199 page

9.13

INT2_CTRL (0Eh)

INT2 pin control register (r/w)

Each bit in this register enables a signal to be carried out on INT2 when the MIPI I3CSM dynamic address in not

assigned (I²C or SPI is used). Some bits can be also used to trigger an IBI when the I3C interface is used. The

output of the pin will be the OR combination of the signals selected here and in MD2_CFG (5Fh).

Table 46. INT2_CTRL register

INT2_

CNT_BDR

INT2_

FIFO_FULL

INT2_

FIFO_OVR

INT2_

FIFO_TH

INT2_

DRDY_TEMP

INT2_

DRDY_G

INT2_

DRDY_XL

Table 47. INT2_CTRL register description

INT2_CNT_BDR

Enables COUNTER_BDR_IA interrupt on INT2

INT2_FIFO_FULL

Enables FIFO full flag interrupt on INT2 pin

INT2_FIFO_OVR

Enables FIFO overrun interrupt on INT2 pin

INT_FIFO_TH

Enables FIFO threshold interrupt on INT2 pin

INT2_DRDY_TEMP

Enables temperature sensor data-ready interrupt on INT2 pin. It can be also used to trigger an IBI when

the MIPI I3CSM interface is used and INT2_ON_INT1 = ‘1’ in CTRL4_C (13h).

INT2_DRDY_G

Gyroscope data-ready interrupt on INT2 pin

INT2_DRDY_XL

Accelerometer data-ready interrupt on INT2 pin

9.14

WHO_AM_I (0Fh)

WHO_AM_I register (r). This is a read-only register. Its value is fixed at 6Ch.

Table 48. WhoAmI register

LSM6DSOX

INT2_CTRL (0Eh)

DS12814 - Rev 3

page 55/199

LSM6DSOX Scheda tecnica(PDF) 55 Page - STMicroelectronics

LSM6DSOX Scheda tecnica(HTML) 55 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL