DMM 7510 7½-Digit Graphical Sampling Multimeter

Vibration

MIL-PRF-28800F Class 3, Random.

Warm-up

90 minutes to rated accuracy.

Input Signal Connections

Front and rear safety banana jacks.

Cooling

Forced air, fixed speed.

Dimensions

Without handle and bumpers: 88 mm high × 213 mm wide × 410 mm deep (3.46 in. × 8.39 in. ×

16.13 in.).

With handle and bumpers (bench configuration): 106 mm high × 255 mm wide × 425 mm deep (4.18 in.

× 10.05 in. × 16.75 in.).

Shipping weight (with bumpers and handle)

4.08 kg (9.0 lb.).

Shipping weight (without bumpers and handle)

3.63 kg (8.0 lb.).

Digital I/O:

Connector

9-pin female D.

5V Power Supply Pin

Limited to 500 mA at > 4 V (solidstate fuse protected).

Lines

Six input/output, user-defined, for digital I/O or triggering.

Input Signal Levels:

0.7 V (maximum logic low)

3.7 V (minimum logic high).

Input Voltage Limits:

–0.25 V (absolute minimum)

+5.25 V (absolute maximum).

Maximum Source Current

+2.0 mA at >2.7 V (per pin).

Maximum Sink Current

–50 mA at 0.7 V (per pin, solid-state fuse protected).

Handler

User-defined start of test, end of test, four category bits

Math Functions

Rel, dB, Limit Test, Percentage, 1/x, and mX + b.

Remote Interface:

LAN

RJ-45 connector, 10/100BT; Virtual Front Panel.

IP Configuration

Static or DHCP.

GPIB

IEEE-488.1 compliant. Supports IEEE-488.2 common commands and status model topology.

USB Device (rear panel, type B)

2.0 full speed, USBTMC compliant.

USB Host (front panel, type A)

USB 2.0, support for flash drives, FAT 32.

LXI Compliance

LXI version 1.4 Core 2011.

Language

Embedded Test Script Processor (TSP) accessible from any host interface; responds to high-speed

test scripts comprised of remote commands and statements (for example, branching, looping, math);

able to execute high-speed test scripts stored in memory without host intervention; also SCPI (default

command set).

Accessories Supplied

Product Information CD-ROM, DMM7510 Quick Start Guide, Kickstart Software Quick Start Guide, power

cord, 1 m USB cable (type A to type B), 3 m LAN cable, and 1756 Standard Test Lead Kit.

Accessories Available

LabWindows™/CVI.

Display

Five-inch capacitive touch, color thin-film-transistor (TFT) WVGA (800×480) with LED backlight.

Password Protection

30 characters.

Expansion Interface

each other.

IP configuration

Static or DHCP (manual or automatic).