| Motore di ricerca datesheet componenti elettronici |
|
CC2640R2FYFVT.B Scheda tecnica(PDF) 23 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
CC2640R2FYFVT.B Scheda tecnica(HTML) 23 Page - Texas Instruments |
|
23 / 74 page ![]() 8.11 1-Mbps GFSK (Bluetooth low energy) – TX Measured on the TI CC2650EM-5XD reference design with Tc = 25°C, VDDS = 3.0 V, fRF = 2440 MHz, unless otherwise noted. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Output power, highest setting Differential mode, delivered to a single-ended 50-Ω load through a balun 5 dBm Output power, highest setting Measured on CC2650EM-4XS, delivered to a single-ended 50-Ω load 2 dBm Output power, lowest setting Delivered to a single-ended 50-Ω load through a balun –21 dBm Spurious emission conducted measurement(1) f < 1 GHz, outside restricted bands –43 dBm f < 1 GHz, restricted bands ETSI –65 dBm f < 1 GHz, restricted bands FCC –71 dBm f > 1 GHz, including harmonics –46 dBm (1) Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan). 8.12 2-Mbps GFSK (Bluetooth 5) – RX Measured on the TI CC2650EM-5XD reference design with Tc = 25°C, VDDS = 3.0 V, fRF = 2440 MHz, unless otherwise noted. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Receiver sensitivity Differential mode. Measured at the CC2650EM-5XD SMA connector, BER = 10–3 –91 dBm Receiver saturation Differential mode. Measured at the CC2650EM-5XD SMA connector, BER = 10–3 3 dBm Frequency error tolerance Difference between the incoming carrier frequency and the internally generated carrier frequency –300 500 kHz Data rate error tolerance Difference between incoming data rate and the internally generated data rate –1000 1000 ppm Co-channel rejection(1) Wanted signal at –67 dBm, modulated interferer in channel, BER = 10–3 –7 dB Selectivity, ±2 MHz(1) Wanted signal at –67 dBm, modulated interferer at ±2 MHz, Image frequency is at –2 MHz BER = 10–3 8 / 4(2) dB Selectivity, ±4 MHz(1) Wanted signal at –67 dBm, modulated interferer at ±4 MHz, BER = 10–3 31 / 26(2) dB Selectivity, ±6 MHz(1) Wanted signal at –67 dBm, modulated interferer at ±6 MHz, BER = 10–3 37 / 38(2) dB Alternate channel rejection, ±7 MHz(1) Wanted signal at –67 dBm, modulated interferer at ≥ ±7 MHz, BER = 10–3 37 / 36(2) dB Selectivity, image frequency(1) Wanted signal at –67 dBm, modulated interferer at image frequency, BER = 10–3 4 dB Selectivity, image frequency ±2 MHz(1) Note that Image frequency + 2 MHz is the Co-channel. Wanted signal at –67 dBm, modulated interferer at ±2 MHz from image frequency, BER = 10–3 –7 / 26(2) dB Out-of-band blocking(3) 30 MHz to 2000 MHz –33 dBm Out-of-band blocking 2003 MHz to 2399 MHz –15 dBm Out-of-band blocking 2484 MHz to 2997 MHz –12 dBm Out-of-band blocking 3000 MHz to 12.75 GHz –10 dBm Intermodulation Wanted signal at 2402 MHz, –64 dBm. Two interferers at 2408 and 2414 MHz respectively, at the given power level –45 dBm (1) Numbers given as I/C dB. (2) X / Y, where X is +N MHz and Y is –N MHz. www.ti.com CC2640R2F SWRS204C – DECEMBER 2016 – REVISED SEPTEMBER 2020 Copyright © 2020 Texas Instruments Incorporated Submit Document Feedback 23 Product Folder Links: CC2640R2F |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |