CC2640R2FYFVT.B datasheet(37/74 Pages) TI2

37 / 74 page

9.3 Main CPU

The SimpleLink™ CC2640R2F Wireless MCU contains an Arm® Cortex®-M3 (CM3) 32-bit CPU, which runs the

application and the higher layers of the protocol stack.

The CM3 processor provides a high-performance, low-cost platform that meets the system requirements of

minimal memory implementation, and low-power consumption, while delivering outstanding computational

performance and exceptional system response to interrupts.

Arm® Cortex®-M3 features include:

• 32-bit Arm® Cortex®-M3 architecture optimized for small-footprint embedded applications

• Outstanding processing performance combined with fast interrupt handling

• Arm® Thumb®-2 mixed 16- and 32-bit instruction set delivers the high performance expected of a 32-bit Arm®

core in a compact memory size usually associated with 8- and 16-bit devices, typically in the range of a few

kilobytes of memory for microcontroller-class applications:

– Single-cycle multiply instruction and hardware divide

– Atomic bit manipulation (bit-banding), delivering maximum memory use and streamlined peripheral control

– Unaligned data access, enabling data to be efficiently packed into memory

• Fast code execution permits slower processor clock or increases sleep mode time

• Harvard architecture characterized by separate buses for instruction and data

• Efficient processor core, system, and memories

• Hardware division and fast digital-signal-processing oriented multiply accumulate

• Saturating arithmetic for signal processing

• Deterministic, high-performance interrupt handling for time-critical applications

• Enhanced system debug with extensive breakpoint and trace capabilities

• Serial wire trace reduces the number of pins required for debugging and tracing

• Migration from the ARM7™ processor family for better performance and power efficiency

• Optimized for single-cycle flash memory use

• Ultra-low-power consumption with integrated sleep modes

• 1.25 DMIPS per MHz

9.4 RF Core

The RF Core contains an Arm® Cortex®-M0 processor that interfaces the analog RF and base-band circuits,

handles data to and from the system side, and assembles the information bits in a given packet structure. The

RF core offers a high level, command-based API to the main CPU.

The RF core is capable of autonomously handling the time-critical aspects of the radio protocols (Bluetooth® low

energy) thus offloading the main CPU and leaving more resources for the user application.

The RF core has a dedicated 4-KB SRAM block and runs initially from separate ROM memory. The Arm®

Cortex®-M0 processor is not programmable by customers.

www.ti.com

CC2640R2F

SWRS204C – DECEMBER 2016 – REVISED SEPTEMBER 2020

Submit Document Feedback

Product Folder Links: CC2640R2F

CC2640R2FYFVT.B Scheda tecnica(PDF) 37 Page - Texas Instruments