7733 datasheet(448/940 Pages) RENESAS

Il numero della parte	7733

Spiegazioni elettronici	16-BIT SINGLE-CHIP MICROCOMPUTER

PDF	940 Pages

Scroll/Zoom	100%

Produttore elettronici	RENESAS [Renesas Technology Corp]

Homepage	http://www.renesas.com

Logo

448 / 940 page

APPLICATIONS

7733 Group User’s Manual

17–41

17.3 Watchdog timer

A program runaway detection example with using the watchdog timer is described below.

17.3.1 Program runaway detection example

In this example, when the watchdog timer detect a program runaway, the microcomputer is reset.

(1) Specifications

The main clock is the system clock and f(XIN) = 16 MHz.

When an interval of 4.09 ms has passed after value “FFF16” is set, the watchdog timer issues

an interrupt request. (When writing to address 6016 is not performed because of a program runa-

way.)

When a watchdog timer interrupt request occurs, the microcomputer is reset. (“Software reset” is

applied.)

(2) Initial setting for related register

17.3 Watchdog timer

Fig. 17.3.1 Initial setting for related register

Watchdog timer count source: clock f 32

(In the case where f(XIN) = 16 MHz, a watchdog timer interrupt request occurs

when an interval of 4.09 ms has passed after value “FFF 16” is set.)

@ Watchdog timer frequency selection flag (address 61 16)

7733 Scheda tecnica(PDF) 448 Page - Renesas Technology Corp