| Motore di ricerca datesheet componenti elettronici |
|
ATtiny13A Scheda tecnica(PDF) 71 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATtiny13A Scheda tecnica(HTML) 71 Page - ATMEL Corporation |
|
71 / 174 page ![]() 71 8126D–AVR–11/09 ATtiny13A Table 11-3 shows the COM0A1:0 bit functionality when the WGM01:0 bits are set to fast PWM mode. Note: 1. A special case occurs when OCR0A equals TOP and COM0A1 is set. In this case, the Com- pare Match is ignored, but the set or clear is done at TOP. See “Fast PWM Mode” on page 65 for more details. Table 11-4 shows the COM0A1:0 bit functionality when the WGM02:0 bits are set to phase cor- rect PWM mode. Note: 1. A special case occurs when OCR0A equals TOP and COM0A1 is set. In this case, the Com- pare Match is ignored, but the set or clear is done at TOP. See “Phase Correct PWM Mode” on page 67 for more details. • Bits 5:4 – COM0B1:0: Compare Match Output B Mode These bits control the Output Compare pin (OC0B) behavior. If one or both of the COM0B1:0 bits are set, the OC0B output overrides the normal port functionality of the I/O pin it is connected to. However, note that the Data Direction Register (DDR) bit corresponding to the OC0B pin must be set in order to enable the output driver. When OC0B is connected to the pin, the function of the COM0B1:0 bits depends on the WGM02:0 bit setting. Table 11-5 on page 72 shows the COM0B1:0 bit functionality when the WGM02:0 bits are set to a normal or CTC mode (non-PWM). Table 11-3. Compare Output Mode, Fast PWM Mode(1) COM0A1 COM0A0 Description 0 0 Normal port operation, OC0A disconnected. 01 WGM02 = 0: Normal Port Operation, OC0A Disconnected. WGM02 = 1: Toggle OC0A on Compare Match. 1 0 Clear OC0A on Compare Match, set OC0A at TOP 1 1 Set OC0A on Compare Match, clear OC0A at TOP Table 11-4. Compare Output Mode, Phase Correct PWM Mode(1) COM0A1 COM0A0 Description 0 0 Normal port operation, OC0A disconnected. 01 WGM02 = 0: Normal Port Operation, OC0A Disconnected. WGM02 = 1: Toggle OC0A on Compare Match. 10 Clear OC0A on Compare Match when up-counting. Set OC0A on Compare Match when down-counting. 11 Set OC0A on Compare Match when up-counting. Clear OC0A on Compare Match when down-counting. |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |