STR750F datasheet(32/73 Pages) STMICROELECTRONICS

32 / 73 page

Electrical parameters

STR750F

32/71

3.2.2

Current characteristics

3.2.3

Thermal characteristics

Table 7.

Current characteristics

Symbol

Ratings

Maximum

value

Unit

IVDD_IO

(1)

The user can use GPIOs to source or sink high current (up to 20 mA for O8 type High Sink I/Os). In this

case, the user must ensure that these absolute max. values are not exceeded (taking into account the

RUN power consumption) and must follow the rules described in Section 3.3.8: I/O port pin characteristics

on page 53.

Total current into VDD_IO power lines (source)

(2)

All 3.3 V or 5.0 V power (VDD_IO, VDDA_ADC, VDDA_PLL) and ground (VSS_IO, VSSA_ADC, VDDA_ADC) pins

must always be connected to the external 3.3V or 5.0V supply.

150

IVSS_IO

(1)

Total current out of VSS ground lines (sink)

(2)

150

IIO

Output current sunk by any I/O and control pin

Output current source by any I/Os and control pin

- 25

IINJ(PIN)

(3) & (4)

IINJ(PIN) must never be exceeded. This is implicitly insured if VIN maximum is respected. If VIN maximum

cannot be respected, the injection current must be limited externally to the IINJ(PIN) value. A positive

injection is induced by VIN>VDD while a negative injection is induced by VIN<VSS.

Negative injection disturbs the analog performance of the device. See note in Section 3.3.12: 10-bit ADC

characteristics on page 64.

Injected current on NRSTIN pin

± 5

Injected current on XT1 and XT2 pins

± 5

Injected current on any other pin (5)

When several inputs are submitted to a current injection, the maximum

ΣIINJ(PIN) is the absolute sum of the

positive and negative injected currents (instantaneous values). These results are based on

characterization with

ΣIINJ(PIN) maximum current injection on four I/O port pins of the device.

± 5

ΣIINJ(PIN)(3)

Total injected current (sum of all I/O and control pins) (5)

± 25

Table 8.

Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

-65 to +150

°C

Maximum junction temperature (see Section 4.2: Thermal characteristics on

page 70)

STR750F Scheda tecnica(PDF) 32 Page - STMicroelectronics

STR750F Scheda tecnica(HTML) 32 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

Scheda tecnica Scarica

Link URL