ISL85415

8. Revision History

FN8373 Rev.5.01

Page 29 of 30

Jun.4.20

8.

Revision History

Rev.

Date

Description

5.01

Jun.4.20

Updated title for Figure 2 -

from: Shutdown Supply Current vs Temperature

to: Efficiency vs Load Current and Supply Voltage

Updated Disclaimer

5.00

Jul.24.19

Applied new formatting.

Updated Related Literature section.

Updated Ordering Information table by adding tape and reel information, updating notes, and adding

evaluation boards.

Updated FB voltage in the Electrical Specifications section: Min change from 0.589 to 0.594, Typ

changed from 0.599 to 0.600, and Max changed from 0.609 to 0.606.

Updated FB voltage to 2% in the Light Load Operation section.

Added Minimum On/Off-Time Limitation section.

Removed About Intersil section.

Updated POD to the latest revision.

4.00

Oct.30.14

Replaced Figure 59 on page 19

Updated About Intersil verbiage

Added Feedback button

3.00

Nov.22.13

“Pin Descriptions” on page 3 made correction to page reference for SS pin and added text for SYNC

pin after “Connect to logic low or ground for PFM Mode” which reads “Logic ground enables the IC to

automatically choose PFM or PWM operation” and 1MΩ changed to 5MΩ.

Electrical Spec Table for “SYNC Pulse Width” on page 8 changed 100ns from TYP to MIN

Added Note reference to Minimum On Time in “Electrical spec” table on page 8.

Equation 12 on page 21 changed value changed from 157kΩ to 150.2kΩ

Added sentence to last paragraph on page 21 which begins with “In practice...”

Figure 49 on page 15 changed scale on VOUT from 2V/div to 10mV/div

2.00

Oct.26.13

Removed Table of key differences from page 1.

Equation 9 on page 20 and Equation 12 on page 21 changed coefficient from 31.4 to 27.3.

1.00

Oct.05.13

Figure 38 on page 13 changed "PWM" to "PFM" in the title.

All LX notations changed to PHASE in Typical Performance Curves beginning on page 12.

0.00

Jul.15.13

Initial Release.