HD404369F datasheet(25/117 Pages) RENESAS

25 / 117 page

HD404369 Series

Interrupt Enable Flag (IE: $000, Bit 0): Controls the entire interrupt process. It is reset by the interrupt

processing and set by the RTNI instruction, as listed in table 4.

Table 4

Interrupt Enable Flag (IE: $000, Bit 0)

Interrupt Enabled/Disabled

Disabled

Enabled

External Interrupts (

INT

0, INT1): Two external interrupt signals.

External Interrupt Request Flags (IF0: $000, Bit 2; IF1: $001, Bit 0): IF0 and IF1 are set at the rising

edge of signals input to

INT

0 and INT1, as listed in table 5.

Table 5

External Interrupt Request Flags (IF0: $000, Bit2; IF1: $001, Bit 0)

IF0, IF1

Interrupt Request

0No

Yes

External Interrupt Masks (IM0: $000, Bit 3; IM1: $001, Bit 1): Prevent (mask) interrupt requests

caused by the corresponding external interrupt request flags, as listed in table 6.

Table 6

External Interrupt Masks (IM0: $000, Bit 3; IM1: $001, Bit 1)

IM0, IM1

Interrupt Request

Enabled

Disabled (masked)

Timer A Interrupt Request Flag (IFTA: $001, Bit 2): Set by overflow output from timer A, as listed in

table 7.

Table 7

Timer A Interrupt Request Flag (IFTA: $001, Bit 2)

IFTA

Interrupt Request

0No

Yes

Timer A Interrupt Mask (IMTA: $001, Bit 3): Prevents (masks) an interrupt request caused by the timer

A interrupt request flag, as listed in table 8.

HD404369F Scheda tecnica(PDF) 25 Page - Renesas Technology Corp