HD6432138SW datasheet(747/1061 Pages) RENESAS

Il numero della parte	HD6432138SW

Spiegazioni elettronici	Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2100 Series

PDF	1061 Pages

Scroll/Zoom	100%

Produttore elettronici	RENESAS [Renesas Technology Corp]

Homepage	http://www.renesas.com

Logo

747 / 1061 page

Section 24 Power-Down State

Rev. 4.00 Jun 06, 2006 page 693 of 1004

REJ09B0301-0400

24.5

Module Stop Mode

24.5.1

Module Stop Mode

Module stop mode can be set for individual on-chip supporting modules.

When the corresponding MSTP bit in MSTPCR is set to 1, module operation stops at the end of

the bus cycle and a transition is made to module stop mode. The CPU continues operating

independently.

Table 24.4 shows MSTP bits and the corresponding on-chip supporting modules.

When the corresponding MSTP bit is cleared to 0, module stop mode is cleared and the module

starts operating again at the end of the bus cycle. In module stop mode, the internal states of

modules other than the SCI, A/D converter, 8-bit PWM module, and 14-bit PWM module, are

retained.

After reset release, all modules other than the DTC are in module stop mode.

When an on-chip supporting module is in module stop mode, read/write access to its registers is

disabled.

HD6432138SW Scheda tecnica(PDF) 747 Page - Renesas Technology Corp