H8SSLASH2218 datasheet(362/750 Pages) RENESAS

362 / 750 page

Section 9 16-Bit Timer Pulse Unit (TPU)

Rev.6.00 Jun. 03, 2008 Page 314 of 698

REJ09B0074-0600

Table 9.18

PWM Output Registers and Output Pins

Output Pins

Channel

Registers

PWM Mode 1

PWM Mode 2

TGRA_0

TIOCA0

TGRB_0

TIOCA0

TIOCB0

TGRC_0

TIOCC0

TGRD_0

TIOCC0

TIOCD0

TGRA_1

TIOCA1

TGRB_1

TIOCA1

TIOCB1

TGRA_2

TIOCA2

TGRB_2

TIOCB2

Note:

In PWM mode 2, PWM output is not possible for the TGR register in which the period is set.

Example of PWM Mode Setting Procedure: Figure 9.21 shows an example of the PWM mode

setting procedure.

PWM mode

Select counter clock

Select counter clearing source

Select waveform output level

Set TGR

Set PWM mode

Start count

Select the counter clock with bits TPSC2 to

TPSC0 in TCR. At the same time, select the

input clock edge with bits CKEG1 and CKEG0

in TCR.

Use bits CCLR2 to CCLR0 in TCR to select the

TGR to be used as the TCNT clearing source.

Use TIOR to designate the TGR as an output

compare register, and select the initial value and

output value.

Set the cycle in the TGR selected in [2], and set

the duty in the other the TGR.

Select the PWM mode with bits MD3 to MD0 in

TMDR.

Set the CST bit in TSTR to 1 start the count

operation.

[1]

[2]

[3]

[4]

[5]

[6]

[1]

[2]

[3]

[4]

[5]

[6]

Figure 9.21 Example of PWM Mode Setting Procedure

H8S/2218 Scheda tecnica(PDF) 362 Page - Renesas Technology Corp

H8S/2218 Scheda tecnica(HTML) 362 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL